Olympus nortec 600 - Figure 6-17 the Device Menu - Issue Command; Figure 6-18 the Issue Command Dialog Box

DMTA-10040-01EN, Rev. E, February 2018
NORTEC PC Software 309
To issue remote commands
1. On the Device menu, select Issue Command (see Figure 6-17 on page 309).
The Issue Command dialog box opens (see Figure 6-18 on page 309).
Figure 6‑17 The Device menu — Issue Command
2. In the Issue Command dialog box, enter a command (see Figure 6-18 on
page 309).
Figure 6‑18 The Issue Command dialog box