DMTA-10040-01EN, Rev. E, February 2018
Instrument Overview 33
6. Position the alkaline battery holder in the battery compartment.
Figure 1‑12 The alkaline battery holder
7. Install the battery compartment cover at the back of the instrument, and then
tighten the two thumb screws.
When alkaline batteries are installed in the instrument, the battery indicator in the
user interface displays ALK. The charger/adaptor does not recharge the batteries
installed in the alkaline battery holder.
1.5 Optional microSD Card Installation
A 2 GB microSD card (Olympus P/N: MICROSD-ADP-2GB [U8779307]) can be
installed in the NORTEC 600 instrument.
To install the microSD removable memory card
1. Remove the card from its packaging.
Battery holder
with alkaline
batteries (eight)
Battery holder
connector
Battery compartment cover
Thumb screws
(two)
Stand
To Next Page
Loading...
