DMTA-10040-01EN, Rev. E, February 2018
Initial Setup 63
3. Initial Setup
This chapter contains the basic configurations for the NORTEC 600 instrument.
3.1 Setting the User Interface Language and the Decimal Symbol
You can configure the NORTEC 600 instrument to present the user interface in the
following languages: English, French, Spanish, German, Japanese, Chinese, Russian,
Swedish, Italian, Portuguese, Norwegian, Hungarian, Polish, Dutch, and Czech. You
can also change the character that represents the decimal of a number.
To change the user interface language and the decimal symbol
1. Press the ADV SETUP menu key ( ) twice, and then press the B key to access
the SYSTEM SETUP screen (see Figure 3-1 on page 63).
Figure 3‑1 The SYSTEM SETUP screen
To Next Page
Loading...
