Olympus nortec 600 - Changing the Display Settings

DMTA-10040-01EN, Rev. E, February 2018
Software User Interface 55
Figure 2‑6 The ALL SETTINGS menu
2.3.1 Using the ALL SETTINGS Menu
The ALL SETTINGS menu is accessed through the ADV SETUP menu key ( ).
To use the ALL SETTINGS menu
1. Press the ADV SETUP menu key ( ).
2. Press the B key.
3. Press the FULL NEXT key ( ) to select the parameter to be adjusted.
4. Rotate the knob to select the desired value.
5. Press the FULL NEXT key ( ) to select additional parameters to be adjusted.
OR
Press to exit the menu and return to the previous screen.
Parameters
Title bar
Help text