DMTA-10040-01EN, Rev. E, February 2018
Control Functions 95
STORE
Used to overwrite an existing file with the current settings and data.
To overwrite a file, select it with the knob, then press the MEM menu key ( )
until the GENERAL page is displayed, and then press the A key (see Figure 4-15
on page 95).
Figure 4‑15 The STORE function
BACKUP / RESTORE
Used to create a backup copy of the instrument data, which is then saved on the
external microSD card. This image can then be transferred to a computer or to
another NORTEC 600 instrument.
If the external microSD card contains data, this function acts as a RESTORE: the
SD card’s data contents are copied to replace the instrument’s internal memory.
The RESTORE function erases the instrument’s internal memory and replaces it with
the data contents of the external SD card. BACKUP / RESTORE saves files on the
internal memory’s microSD card.
To back up the instrument’s data or restore the instrument’s internal memory,
press the MEM menu key ( ) twice, and then press the B key followed by the
A key or B key to either backup or restore.
To Next Page
Loading...
