Olympus nortec 600 - Issuing Remote Commands to the NORTEC 600 from a PC; Figure 6-15 the File Menu; Figure 6-16 Selecting the Remote Command

DMTA-10040-01EN, Rev. E, February 2018
Chapter 6308
Figure 6‑15 The File menu
To export all data using the Export All Files As Adobe Acrobat (PDF) option
 On the NORTEC PC File menu, select Export All Files As Adobe Acrobat (PDF)
[see Figure 6-15 on page 308].
6.6 Issuing Remote Commands to the NORTEC 600 from a PC
You can issue single read, write, or execute commands to the NORTEC 600
instrument using the NORTEC PC software. A complete table of the available remote
commands is included at the end of this section.
To view the full list of commands
 On the Help menu, select Remote Command (see Figure 6-16 on page 308).
The command list opens in a separate window using the PC’s default software for
viewing PDF files.
Figure 6‑16 Selecting the Remote Command
Selection for exporting a single file
Selection for exporting all files