DMTA-10040-01EN, Rev. E, February 2018
Appendix A338
A.2 Input/Output Specifications
The specifications for the USB, video output, and input/output signals are provided in
Table 8 on page 333.
Alarms Alarm quantity 3 simultaneous alarms
Available alarm types Choice of BOX (rectangle), POLAR (circle),
SECTOR (pie), SWEEP (time-based),
CONDUCTIVITY, and COATING
THICKNESS
Connectivity and
memory
PC software
NORTEC PC software, included in base
NORTEC 600 kit. NORTEC PC allows viewing
of saved files and printing of reports.
On-board preview Yes — selectable with knob
Data storage 500 files featuring on-board preview
Reference signal Instant or recalled from memory
Interface Languages English, Spanish, French, German, Italian,
Japanese, Chinese, Russian, Portuguese, Polish,
Dutch, Korean, Czech, Hungarian, Swedish, and
Norwegian
Ambidextrous mode Switch to ambidextrous mode to place the most
commonly-used controls at the right side of the
instrument.
Supervisor mode Password-protected supervisor mode to lock
instrument menus and keys.
Instrument modes Single frequency, dual frequency, or conductivity
Menu structure Single menu-level interface with All Settings
form for easy configuration from a procedure
Applications Application selection menu for easy and rapid
configuration
Real-time readings Choice of up to 2 real-time readings to measure
signal characteristics (selection of 5 amplitude
measurements and 2 angle measurements)
Colors 8 schemes to accommodate all lighting
conditions and user preferences
Table 8 General and environmental specifications (continued)
Category Parameter Va lue
To Next Page
Loading...
