DMTA-10040-01EN, Rev. E, February 2018
Software User Interface 49
2. Software User Interface
This chapter explains the main software screens and menus on the NORTEC 600
instrument. The back of the NORTEC 600 contains a quick guide to the instrument
keypad and functions (see Figure 2-1 on page 49).
Figure 2‑1 The instrument label showing keypad functions
2.1 Starting Up the Instrument
When power is turned on, the NORTEC 600 starts up in one of two modes, depending
on what is connected to the instrument.
If no probe is connected, or if a probe that is not a PowerLink type of probe is
connected, the first screen displayed by the NORTEC 600 software is the application
quick-setup menu (see Figure 2-2 on page 50). Choose from among the basic
applications on this menu to automatically configure the appropriate instruments
settings. For more details on the application quick-setup menu, see “Common
NORTEC 600 Applications” on page 120.
To Next Page
Loading...
