Olympus nortec 600 - Page 326

DMTA-10040-01EN, Rev. E, February 2018
Chapter 6316
REF Reference Memory R/W N/A N/A
RLK Lock R ON/OFF
RPM Scanner RPM R/W 600 3000
RUNTIME Total Run Time R N/A N/A
SCZ Scanner Sync Angle R/W 0 359
SEC Seconds R/W 0 59
SNO Gage Serial Number R XXXX-XXXX-XXXX-XXXX,
where X is 0–9, A–F
SW? Software Version R N/A
SWP Sweep Mode R/W AUTO Y/AUTO XY/ EXT Y/
EXT XY
TIM Clock Time R XX:XX
UI1 User Info 1 R/W Max 40 Characters – No spaces.
Use “{” character for space.
UI2 User Info 2 R/W Max 40 Characters – No spaces.
Use “{” character for space.
UI3 User Info 3 R/W Max 40 Characters – No spaces.
Use “{” character for space.
UI4 User Info 4 R/W Max 40 Characters – No spaces.
Use “{” character for space.
UI5 User Info 5 R/W Max 40 Characters – No spaces.
Use “{” character for space.
UI6 User Info 6 R/W Max 40 Characters – No spaces.
Use “{” character for space.
UI7 User Info 7 R/W Max 40 Characters – No spaces.
Use “{” character for space.
Table 7 NORTEC 600 remote commands (continued)
Command Description R/W/X
Range/valid strings
Min Max