DMTA-10040-01EN, Rev. E, February 2018
Accessories, Replacement Parts, and Upgrades 345
9522333
[Q7670007]
N600 foot switch with NULL and ERASE controls.
CASE-10086
[Q7640004]
Rugged transport case for N600 heat exchanger tubing inspection kit
(HX-ADPT-KIT).
HX-ADPT-KIT
[Q7670041]
NORTEC 600 heat exchanger tubing inspection adaptor kit for eddy
current (ECT), near field (NFT) and remote field (RFT). Compatible with
NORTEC 600D (dual frequency) only.
This kit includes the following items:
• One CBAS-10818-0001 differential and absolute eddy current tube
probe adaptor, with PowerLink. 4-pin Amphenol to 16-pin LEMO.
30 cm (1 ft) length. Compatible with Olympus TEA/TEB, TEC/TED,
TEE/TEF, TEG, TEK/TEL, and TEO series MS5800 eddy current
bobbin probes and most bobbin probes from other manufacturers.
• One CBAS-10819-0001 differential only near-field tube probe
adaptor, with PowerLink. 19-pin BENDIX to 16-pin LEMO. 30 cm
(1 ft) length. Compatible with TRD series MS5800 near-field tube
probes.
• One CBAS-10820-0001 absolute only near-field tube probe adaptor,
with PowerLink. 19-pin BENDIX to 16-pin LEMO. 30 cm (1 ft) length.
Compatible with TRD series MS5800 near-field tube probes.
• One CBAS-10821-0001 differential and absolute remote-field tube
probe adaptor, with PowerLink and active circuitry. 19-pin BENDIX
to 16-pin LEMO. 30 cm (1 ft) length. Compatible with TRS and TRX
series MS5800 remote-field probes.
• One 9122404 foot switch armored cable. Triax Fischer/LEMO to Triax
Fischer/LEMO connectors, 4.5 m (15 ft) length.
• One 9522336 foot switch adaptor, 16-pin LEMO
• One 9522333 foot switch with NULL and ERASE controls
• One CASE-10086 rugged transport case
• One info card (list of items in kit)
• One spare compartment for NORTEC 600 instrument. IMPORTANT:
The NORTEC 600 instrument is NOT included in this kit and must
be ordered separately.
Table 18 Heat exchanger tubing accessories — for N600D model only (continued)
Part number Description
To Next Page
Loading...
