EasyManua.ls Logo

Renesas RL78 Series - CAN Receive Rule Number Configuration Register (GAFLCFG)

Renesas RL78 Series
1879 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RL78/F13, F14 CHAPTER 18 CAN INTERFACE (RS-CAN LITE)
R01UH0368EJ0210 Rev.2.10 1308
Dec 10, 2015
18.3.17 CAN Receive Rule Number Configuration Register (GAFLCFG)
Address GAFLCFGL: F0330H, GAFLCFGH: F0331H
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
— — — — — — — — — — — RNC0[4:0]
After Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit Symbol Bit Name Description R/W
15 to 5 Reserved These bits are always read as 0. R
4 to 0 RNC0[4:0] CANi Receive Rule Number Set Set the number of receive rules of channel 0.
Set these bits to a value within a range of H'00 to H'10.
R/W
Modify the GAFLCFG register only in global reset mode.
Up to 16 rules can be registered in the receive rule table.
RNC0[4:0] Bits
These bits are used to set the number of rules to be registered in the channel 0 receive rule table.
Set these bits to a value within a range of H'00 to H'10.

Table of Contents

Other manuals for Renesas RL78 Series

Related product manuals