EasyManua.ls Logo

Renesas RL78 Series - Cani Error Flag Register H (Cierflh) (I = 0)

Renesas RL78 Series
1879 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RL78/F13, F14 CHAPTER 18 CAN INTERFACE (RS-CAN LITE)
R01UH0368EJ0210 Rev.2.10 1298
Dec 10, 2015
18.3.8 CANi Error Flag Register H (CiERFLH) (i = 0)
Address C0ERFLHL: F030EH, C0ERFLHH: F030FH
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
CRCREG[14:0]
After Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit Symbol Bit Name Description R/W
15 Reserved This bit is always read as 0. The write value should always
be 0.
R
14 to 0 CRCREG
[14:0]
CRC Calculation Data A CRC value calculated based on the transmit message or
receive message is indicated.
R
CRCREG[14:0] Bits
When the CTME bit in the CiCTRH register is set to 1 (communication test mode is enabled), the CRC value
calculated based on the transmit or receive message can be read. When the CTME bit is set to 0
(communication test mode is disabled), these bits are always read as 0.

Table of Contents

Other manuals for Renesas RL78 Series

Related product manuals