Renesas RL78 Series

RL78/F13, F14 CHAPTER 12 A/D CONVERTER
R01UH0368EJ0210 Rev.2.10 705
Dec 10, 2015
12.3 Registers Used in A/D Converter
The A/D converter uses the following registers.
 Peripheral enable register 0 (PER0)
 A/D converter mode register 0 (ADM0)
 A/D converter mode register 1 (ADM1)
 A/D converter mode register 2 (ADM2)
 10-bit A/D conversion result register (ADCR)
 8-bit A/D conversion result register (ADCRH)
 Analog input channel specification register (ADS)
 Conversion result comparison upper limit setting register (ADUL)
 Conversion result comparison lower limit setting register (ADLL)
 A/D test register (ADTES)
 A/D port configuration register (ADPC)
 A/D converter trigger select registers 0, 1 (ADTRGS0, ADTRGS1)
 Port mode control registers 7, 9, and 12 (PMC7, PMC9, PMC12)
 Port mode registers 3, 7 to 10, 12 (PM3, PM7 to PM10, PM12)