EasyManua.ls Logo

Renesas RL78 Series - CAN Receive Buffer Number Configuration Register (RMNB)

Renesas RL78 Series
1879 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RL78/F13, F14 CHAPTER 18 CAN INTERFACE (RS-CAN LITE)
R01UH0368EJ0210 Rev.2.10 1315
Dec 10, 2015
18.3.24 CAN Receive Buffer Number Configuration Register (RMNB)
Address RMNBL: F0332H
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
— — — — — — — — — — — NRXMB[4:0]
After Reset 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit Symbol Bit Name Description R/W
15 to 5 Reserved These bits are always read as 0. The write value should
always be 0.
R
4 to 0 NRXMB[4:0] Receive Buffer Number
Configuration
Set the number of receive buffers.
Set a value of 0 to 16.
R/W
Modify the RMNB register only in global reset mode.
NRXMB[4:0] Bits
These bits are used to set the total number of receive buffers of the CAN module.
The maximum value is 16.
Setting these bits to all 0 makes receive buffers unavailable.

Table of Contents

Other manuals for Renesas RL78 Series

Related product manuals