When SC670 (Engine start up error) is displayed
Cause:
The engine board resets at an unexpected time, and does not start up again.
Solution:
Note: CTL = Controller
SC670-01
Engine start up error when the machine boots up
If the symptom occurs, use the following chart to decide the best course of action.
SC670-02
Engine start up error when the machine is in operation.
Replace the part in order of precedence stated below (since there is a high possibility that those
parts are broken and causing the error).
1. Replace BCU
6. Troubleshooting
1066
To Next Page
Loading...
