G
Switches which size to set as auto detect with SP.
*Example: The combination of A1-G1.
G (When not auto detectable) will be as same as B.
Combinations are only made from same region same tray.
*Example: The combination of G1 and J1.
G (When not auto detectable) will be as same as E.
Combinations are only made from same region same tray.
H Size fixed when shipping.
I
<Bypass setting>
With bypass tray, after 1
st
sheet trailing edge goes through,
auto detects size, then fixed to size detected from the 2
nd
sheet.
J
<Bypass setting>
Auto detect of Copy window/Bypass/Standard size/Select
with size button.
K
Select with SP from preset paper sizes.
Can be selected from printer driver.
- Not available
*1
Even the paper size is in the range or available sizes for
duplex, envelopes can not be done so.
Paper Exit
Main unit tray, 1 bin tray, Inner shit tray, Side tray
Size (W x L) [mm]
Main unit
tray
1 bin tray Inner shit tray Side Tray
Main unit
tray
Upper
tray
shift shifting
Bridge
upper exit
Side
tray
A3 SEF (297 x 420) A A A A A A
A4 SEF (210 x 297) A A A A A A
Supported Paper Sizes
31
To Next Page
Loading...
