2. Select [Machine Features] > [System Settings] > [Administrator Tools] > [Copy Data
Security Option] > "On".
Copy Data Security Function
If the Unauthorized Copy Prevention function is enabled, embedded text patterns (for instance, a
warning message such as "No Copying") are displayed when documents are copied illegally.
Accordingly, unauthorized copying can be prevented.
If the Data Security for Copying function is used and settings for special patterns embedded in
documents are enabled, copies of documents with embedded patterns are printed with gray
overprint. Accordingly, information leakage can be prevented. To protect documents by gray
overprint, the Data Security for Copying function must be enabled on the copier or multi-function
printer.
Image Quality Test / Settings
Before Test
• Perform the image quality test after installing all peripherals
• Confirm that there are no accessories (such as screws and clamps) left inside the main machine and
peripherals
Loading Paper
1. Turn ON the main power.
2. Check that the operation panel shows "No Paper" under the "Check Status" screen.
3. The paper size is basically detected automatically.
1. Pull out the paper feed tray slowly until it stops.
2. Load the paper.
3. While pressing the release lever, adjust the side fence to the paper size to be set.
4. Set the back fence.
ACC Execution and Color Registration Adjustment
1. Do the "Automatic Color Calibration (ACC)" for the copier mode & printer mode as
follows:
- Copier mode -
1. "User Tools" icon > "Machine Features" > "Maintenance" > "Auto Color Calibration" >
"Copier Function" > "Start"
Main Machine Installation
91
To Next Page
Loading...
