Ricoh MP C3004 - Temperature and Humidity Sensor

60 and larger
Potential adjustment
61 LD won’t light P patter is not written.
62 Residual potential: Vr error Vr>Max
63
Electrified potential: Vd adjust
error
Vd cannot be adjusted in target
range.
64
Exposure potential: Vpl adjust
error
Vpl cannot be adjusted in target
range
90 and larger
Result(End)
90 Potential not adjusted
Potential control method is set
as [0:FIX]
99 Stopped
Stopped by door open, power
off, error.
(Set when execute.)
• Execution result example (In order of YMCK from left)
• Factory default (SP default): [00,00,00,00]
• Starting adjust: [99,99,99,99]
• Fail Vsg adjust(Y): [21,99,99,99]
• Error of Development gamma Max(C): [99,99,55,99]
• Succeeded: [11,11,11,11]
Temperature and Humidity Sensor
1. 1st and 2nd paper tray (page 660)
4. Replacement and Adjustment
596