Ricoh MP C3004 - Attaching the Proof Support Tray

16. Set the staple cartridge [A].
17. Attach the tray holder ( x2).
18. Close the front cover.
19. Turn ON the main power.
20. Deliver some A3/DLT paper to the proof tray and check if the vertical registration is
correct according to the adjustment scale for A3/DLT paper (page 1138).
21. Check that the finisher can be selected on the operation panel, and check the finisher’s
operation.
Attaching the Proof Support Tray
When using B4, LG or larger paper, or when using limp paper, the sheet may become kinked, resulting
in premature full detection.
Booklet Finisher SR3240 (D3BB)/Finisher SR3230 (D3BA)
243