Ricoh MP C3004 - Controller SP Mode Tables; Controller SP Tables-5

4. Controller SP Mode Tables
Controller SP Tables-5
SP5-XXX (Mode)
5009 [Add Display Language]
Adds language available in user choice. (Only the languages registered in the
machine)
Refer to the displayed language list to set in the way showed below.
List Number Assigned Bit Switch
No.1 to 8 BIT1 to 8 (SP5009-201)
No.9 to 16BIT1 to 8 (SP5009-202)
No.17 to 24BIT1 to 8 (SP5009-203)
No.25 to 32BIT1 to 8 (SP5009-204)
Example: To add American(No.3 in the list) or Czech (No.15)
Turn Bit 3 of “SP5009-201” 0 to 1 for American.
Turn Bit 7 of “SP5009-202” 0 to 1 for Czech.
After setting, turn the main power switch off and on to make the setting valid.
5-009-201 Bit SW *CTL [1 to 255 / 0 / 1]
5-009-202 Bit SW *CTL [1 to 255 / 0 / 1]
5-009-203 Bit SW *CTL [1 to 255 / 0 / 1]
5-009-204 Bit SW *CTL [1 to 255 / 0 / 1]
5024 [mm/inch Display Selection]
Display units (mm or inch) for custom paper sizes.
5-024-001 0:mm 1:inch *CTL [0 or 1 / 1(USA), 0(Others) / 1]
0: mm
1: inch
5045 [Accounting counter]
613