SP Descriptions
• SP1-903-003, and 004 (Amplitude Setting)
Displays amplitude value of BIT1 control.
• SP2-111-001 (Forced Line Position Adj.: Mode a)
Executes MUSIC mode a ( fine-tune x 2)
• SP2-111-002 (Forced Line Position Adj.: Mode b)
Executes MUSIC mode b ( fine-tune x 1)
• SP2-111-003 (Forced Line Position Adj.: Mode c)
Executes MUSIC mode c (rough-tune x 1)
• SP2-111-004 (Forced Line Position Adj.: Mode d)
Executes MUSIC mode d (rough-tune then fine-tune)
• SP2-194-007 (MUSIC Execution Result: Execution Result)
Displays the execution results of MUSIC.
0: Completed successfully, 1: Failed
• SP2-194-010,-011, and -012 (MUSIC Execution Result:Error Result: C, M, Y)
Displays the details of MUSIC results for each color.
• SP3-011-001 (Manual ProCon :Exe: Normal ProCon)
Executes Pro-Con.
• SP3-011-002 (Manual ProCon :Exe: Density Adjustment)
Executes toner density adjusting Pro-Con.
• SP3-011-003 (Manual ProCon :Exe: ACC RunTime ProCon)
Executes pre-ACC Pro-Con.
• SP3-011-004 (Manual ProCon :Exe: Full MUSIC)
Executes Pro-Con / full MUSIC.
• SP3-011-005 (Manual ProCon :Exe: Normal MUSIC)
Executes Pro-Con / normal MUSIC.
• SP3-012-001 to 010 (ProCon OK?: Front)
Displays the history for past 10 times of ProCon results code detected by the front TM/ID sensor.
The code is 2 digits per color from left, in the order of YMCK.
• SP3-012-011 to 020 (ProCon OK?: Center)
Displays the history for past 10 times of ProCon results code detected by the center TM/ID sensor.
The code is 2 digits per color from left, in the order of YMCK.
• SP3-012-021 to 030 (ProCon OK?: Rear)
Process Control
1233
To Next Page
Loading...
