Ricoh MP C3004 - When SC501, SC502, SC503, or SC504 (Paper Tray Error) Is Displayed; Solution

• SP3-012-001-010 (Front)
• SP3-012-011-020 (Center)
• SP3-012-021-030 (Rear)
Execute result sample (In order of YMCK from left)
• Factory default:[00,00,00,00]
• Starting adjust:[99,99,99,99]
• Fail Vsg adjust(Y):[21,99,99,99]
• Error of Development gamma Max(C):[99,99,55,99]
• Succeed:[11,11,11,11]
When SC501, SC502, SC503, or SC504 (Paper Tray Error) is displayed
SC501, SC502, SC503, or SC504 occurs.
Solution:
1. Pull out the paper feed tray [A] on which the SC has occurred, and then, lifting the front
part of the tray, pull it out all the way through (The photograph shows Tray 1.)
6. Troubleshooting
1058