SP descriptions
• SP2-111-004 (Forced Line Position Adj. Mode d)
Executes the fine line position adjustment and rough line position adjustment.
• SP2-194-007 (MUSIC Execution Result: Execution Result)
Displays the result code of MUSIC adjustment.
0: Success
1: Failure
• SP2-194-010 to 013 (MUSIC Execution Result: Error Result C,M, Y, K)
Displays the result code of MUSIC adjustment for each color.
0: Not done
1: Completed successfully
2: Cannot detect patterns
3: Fewer lines on the pattern than the target
4: Out of the adjustment range
5 to 9: Not used
Checking the Copy Image with the Test Chart
Make a copy of a test chart and check the output quality.
Paper Settings
If necessary, adjust the registration for the paper feed tray.
• SP1-002-002 (Side-to-Side Registration Paper Tray 1)
• SP1-002-003 (Side-to-Side Registration Paper Tray 2)
SP descriptions
SP1-002 (Side-to-Side Registration)
Adjusts the side-to-side registration by changing the laser main scan start position for each mode and
tray.
Increasing a value: The image is moved towards the rear edge of the paper.
Decreasing a value: The image is moved towards the front edge of the paper.
Auto Remote Firmware Update Settings
Specify ARFU settings as required.
Operating Conditions:
2. Installation
94
To Next Page
Loading...
