Ricoh MP C3004 - Exiting SP Mode; Types of SP Modes

2. Enter the key code for SP mode.
For details of the key code to enter the SP mode, ask your supervisor.
Exiting SP Mode
Press "Exit" on the LCD twice to return to the copy window.
Types of SP Modes
• System SP: SP modes related to the engine functions
• Printer SP: SP modes related to the controller functions
• Scanner SP: SP modes related to the scanner functions
• Fax SP: SP modes related to the fax functions
Select one of the Service Program modes (System, Printer, Scanner, or Fax) from the touch panel as
shown in the diagram below after you access the SP mode. This section explains the functions of the
System/Printer/Scanner SP modes. Refer to the Fax service manual for the Fax SP modes.
5. System Maintenance
752