Ricoh MP C3004 - Configuring Auto Erase Memory (Performed by the Customer)

13. Make sure that ROM number "D3BC5757A" and firmware version "1.02" appear in both
of the following areas on the report (they must match):
• "ROM Number / Firmware Version" - "HDD Format Option"
• "Loading Program"
Configuring "Auto Erase Memory" (Performed by the Customer)
1. Press the [User Tools] icon.
2. Press [Machine Features].
3. Press [System Settings].
4. Press [Administrator Tools].
5. Press [Next] three times.
6. Press [Auto Erase Memory Setting].
7. Press [On].
8. Select the method of overwriting.
• If you select [NSA] or [DoD], proceed to Step 11.
• If you select [Random Numbers], proceed to Step 9.
2. Installation
452