Ricoh MP C3004 - Gate;Pickup Arm Drive Source; Inter-Roller Transport Path

Gate/pickup arm drive source
Output Drive source Default position Application
Pick-up roller 1 First solenoid
Pressure contact when
OFF
Loaded paper
contact/separation
change-over
Pick-up roller 2 Second solenoid
Pressure contact when
OFF
Loaded paper
contact/separation
change-over
Paper exit junction gate Junction gate solenoid
Paper exit path open
when OFF
MFP paper exit/
intermediate or 1-bin/
two-face path change-
over
By-pass pick-up roller By-pass feed solenoid Clearance when OFF
Loaded paper
contact/separation
change-over
Inter-roller transport path
Distance units: mm
Md From To Distance
First paper feed
First pick-up roller First paper feed roller 30.0
First paper feed roller First transport roller 43.0
Second paper
feed
Second pick-up roller Second paper feed roller 30.0
Second paper feed roller Second transport roller 43.0
Second transport roller First transport roller 96.9
Registration
First transport roller Registration roller 86.8
Registration roller
Paper transfer roller (image
transfer position)
95.5
Fusing
Paper transfer roller (nip) Fusing roller (nip) 85.0
Fusing roller (nip) Fusing exit roller 55.7
Paper Feed / Transport Section
1287