Ricoh MP C3004 - Finisher SR3210 (D3 B8); Accessory Check

Finisher SR3210 (D3B8)
• To attach this optional unit, the following optional units are required.
- Bridge Unit BU3070 (D685)
- LCIT PB3170/PB3230 (D695) or Paper Feed Unit PB3160 (D693)
Accessory Check
No. Description
Q’t
y
Remarks
1 Joint Bracket 1
2 Cushion 1
3 Relay Guide Plate 1
4 Shift Tray 1
5 Ground Plate 1
6 Stabilizer 1
This part must be attached to the finisher just after it
is taken out of the shipping box.
7 Screws - M4 × 12 4
8 Tapping screws - M3 × 6 4
9 Tapping screw - M4 × 8 1
10 Proof Support Tray 1
-
Installation Instruction for
stabilizer
1
Finisher SR3210 (D3B8)
269