Ricoh MP C3004 - Method 2: by [PM Counter; New Unit Set] Menu

5. Replace the PM parts and turn the main power ON.
The machine will reset the PM counters automatically. In the case of the development unit,
developer initialization will also be done automatically.
6. Exit the SP mode.
Method 2: By [PM Counter / New Unit Set] Menu
1. Enter the SP mode.
2. Output the SMC logging data with SP5-990-004.
Make sure to shut down and reboot the machine once before printing the SMC. Otherwise, the
latest settings may not be collected when the SMC is printed.
3. Press [PM Counter / New Unit Set].
PM Parts Settings
479