Ricoh MP C3004 - Finisher Part Specifications

Staple position: Top 1, Bottom 1, Left 2, Top 2
Power consumption: • 50 W or less (without punch unit) (Power is supplied from
the main unit.)
• 60 W or less (with punch unit) (Power is supplied from the
main unit.)
Dimensions (W x D x H): 546 x 523 x 170 mm (21.5 x 20.6 x 6.7 inches)
Weight: Approx. 13 kg (28.7 lb.) (without punch unit)
Approx. 17 kg (37.5 lb.) (with punch unit)
Finisher part specifications
Item Specification
Type Case system
Shift tray Yes
No. of sheets which can be
accommodated
A4, 8
1
/
2
×11 or smaller: 500 / height: lower than 57mm
B4, 8
1
/
2
×14 or larger: 250 / height: lower than 28.5mm
Paper thicknesses which can be
handled
52g/m
2
-300g/m
2
Up/down shift function No
Left/right shift function Yes
Stapling function Yes
Punching function Option
Remainder detection No
Full-load detection Yes
Paper detection No
Power consumption Less than 47W (24V DC /2A)
Power source
24V DC (supplied from main printer), 5V SC (generated by FIN
board), SELV (super-low voltage secondary power supply)
1. Specifications
52