Connecting to LCIT PB3170/ PB3230
1. Perform Steps 1 to 7 of "Connecting to Main Machine Tray" (page 129).
2. Pull out the paper feed tray of the optional LCT unit.
3. Pass the harness of the heater [A] for the optional tray out through the hole in the inner
rear frame of the optional LCT unit, and then attach it ( x1).
4. Remove the securing brackets [A] of the optional LCT unit.
5. Remove the rear cover [A] of the optional LCT unit.
2. Installation
138
To Next Page
Loading...
