Operative Condition Notes
4
Front cover opening/ closing (when the temperature
has changed by a certain amount since the previous job
ended)
Mode a or Mode b is done
5
Waiting (when the temperature has changed by a
certain amount since the previous job ended, and when
the number of pages printed becomes more than a set
number))
Mode b is done
6 New detection of the PCDU/ duplex transfer belt Mode a is done
*1 Mode a: adjusted two times
*2 Mode b: adjusted once
Executing MUSIC Manually
To operate modes a/ b/ c manually, use the following SPs.
• SP2-111-001 (Mode a)
The same procedure as the Color Registration Correction in the Initial Setting [Adjustment
Management]:
• SP2-111-002 (Mode b)
• SP2-111-003 (Mode c)
• SP2-111-004 (Mode d)
After the laser writing unit is changed.
Mode d is the same as doing mode c then mode a.
Normally in the field, we should only use mode d.
• Color registration errors can be corrected only by the mode d when the error is large.
[Color Registration] in User Tools (SP2-111-004)
Correction with higher accuracy can be performed by contacting the image transfer roller and executing
MUSIC in a condition that is almost the same as during actual printing. This process is called ‘contact
MUSIC’.
Contact MUSIC can be done manually by executing HOME screen -> User Tools icon -> Machine
Features -> Maintenance -> Color Registration (SP2-111-004).
7. Detailed Descriptions
1228
To Next Page
Loading...
