Password Setting Procedure
• For more details about this security issue, see "Notes on Using Multi-Function Printers Safely"
supplied with the MFP.
• When Supervisor / Administrator 1-4 passwords are configured via network, the "Change
Supervisor login password" window won’t display.
• The passwords for Supervisor or Administrator 1 to 4 can be set via "System Settings". But the
Program/Change Administrator screen appears every time the power switch is turned ON if the
passwords are input this way. So we recommend the customers to set the passwords via network or
the Program/Change Administrator screen.
1. Install the machine.
2. Turn ON the main power.
Password change display appears.
3. Press [Change] and change the supervisor login password.
4. Input the password, and then press [OK].
5. Confirm the password, and then press [OK].
2. Installation
64
To Next Page
Loading...
