A
Auto detectable. Also can be selected with size button of initial
setting.
B Can be selected with size button from initial setting.
C Select this size by setting the dial.
D Set dial to “*”, then select with size button from initial setting.
E
<Bypass setting>
Copy window/Bypass/Standard size/Size select or select
with the print bypass paper size/size button from initial setting.
F
Select with SP from preset paper sizes.
Cannot be selected from printer driver.
G
Switches which size to set as auto detect with SP.
*Example: The combination of A1-G1.
G (When not auto detectable) will be as same as B.
Combinations are only made from same region same tray.
*Example: The combination of G1 and J1.
G (When not auto detectable) will be as same as E.
Combinations are only made from same region same tray.
H Size fixed when shipping.
I
<Bypass setting>
With bypass tray, after 1
st
sheet trailing edge goes through,
auto detects size, then fixed to size detected from the 2
nd
sheet.
J
<Bypass setting>
Auto detect of Copy window/Bypass/Standard size/Select
with size button.
K
Select with SP from preset paper sizes.
Can be selected from printer driver.
- Not available
Supported Paper Sizes
27
To Next Page
Loading...
