Item Specification
Stapling function Yes
Punching function No
Remainder detection No
Full-load detection Yes
Paper detection No
Power consumption Less than 30W
Power source
24V DC (supplied from main frame), 5V SC (generated by FIN
board), SELV (super-low voltage secondary power supply)
Dimensions
(width×depth×height)
435×515×150 mm
Mass Less than 9.8 kg
Stapler unit specifications
Item Specification
No. of sheets which can be
stitched
2 to 5 sheets
Sizes which can be stitched A3 SEF - B5 SEF / DLT SEF - LT SEF
Thicknesses which can be
stitched
54g/m2-80g/m2
Stitching position 1 position (Top Slant)
Staple supply No
Stitching capacity No
Option Specifications
67
To Next Page
Loading...
