Ricoh MP C3004 - Page 1435

1-003-028 By-pass:Thick1:1200 *ENG [-4 to 5 / -3 / 0.1mm/step]
1-003-029 Duplex:Thin:1200 *ENG [-4 to 5 / -1.5 / 0.1mm/step]
1-003-030 Duplex:Plain:1200 *ENG [-4 to 5 / -1.5 / 0.1mm/step]
1-003-031 Duplex: Mid-thick:1200 *ENG [-4 to 5 / -1.5 / 0.1mm/step]
1-003-032 Duplex:Thick1:1200 *ENG [-4 to 5 / -3.5 / 0.1mm/step]
1007 [By-Pass Size Detection]
1-007-001
Switch LT SEF/LG SEF ENG [0 or 1 / 0 / 1/step]
0:OFF
1:ON
1-007-002 By-Pass Jam Detection Set
ENG [0 or 1 / 0 / 1/step]
0: Normal Detection
1: Simple Detection
1009 [Initial Operation Setting]
1-009-001
Registration Gear Backlash
Cut
*ENG [0 to 1 / 0 / 1/step]
1009 [Operation Setting]
1-009-002 Paper Exit Speed *ENG [0 to 1 / 1 / 1/step]
1009 [Pickup SOL Separate Setting]
1-009-003 Paper Tray1: Thin *ENG [0 to 1 / 1 / 1/step]
1-009-004 Paper Tray1: Plain *ENG [0 to 1 / 1 / 1/step]
1-009-005 Paper Tray1: Thick *ENG [0 to 1 / 1 / 1/step]
1-009-006 Paper Tray2: Thin *ENG [0 to 1 / 1 / 1/step]
1-009-007 Paper Tray2: Plain *ENG [0 to 1 / 1 / 1/step]
1-009-008 Paper Tray2: Thick *ENG [0 to 1 / 1 / 1/step]
1-009-009 Paper Tray3: Thin *ENG [0 to 1 / 1 / 1/step]
1-009-010 Paper Tray3: Plain *ENG [0 to 1 / 1 / 1/step]
Engine SP Tables-1
89