Ricoh MP C3004 - Page 1497

1-121-065
Pre Job Paper Feed
Time:Bk:A6
*ENG [0 to 10000 / * / 1sec/step]
*MP C3004/C3504:
NA: 80, EU: 80, Asia: 80, CN: 80, TW:
80, KR: 80
*MP C4504/C5504/C6004:
NA: 70, EU: 40, Asia: 40, CN: 40, TW:
70 , KR: 40
1-121-066 Soaking Rotary Time:Bk:A6
*ENG [0 to 100 / * / 1sec/step]
*MP C3004/C3504:5
*MP C4504/C5504/C6004: 30
1-121-080
Shift Time: AfterReload:
LineSpd Dwn
*ENG
[0 to 60 / 10 / 0.1sec/step]
1-121-101 Heat Off Time:Start:Warm Up *ENG [0 to 60000 / 0 / 1msec/step]
1-121-102
Heat Off Time:Start:End of A
Control
*ENG [0 to 600000 / 100000 / 1msec/
step]
1-121-103 Time After Feeler Edge Detect *ENG [0 to 200 / 0 / 1sec/step]
1-121-114 Relay ON Temp.:Warm Up *ENG [0 to 250 / 200 / 1deg/step]
1-121-120
ShiftTemp:Press_Full-Bd
Edge:SRA3
*ENG
[100 to 250 / 220 / 1deg/step]
1-121-121 ShiftTemp:PressEdge:A3 *ENG [100 to 250 / 215 / 1deg/step]
1-121-122 ShiftTemp:PressEdge:DLT *ENG [100 to 250 / 205 / 1deg/step]
1-121-123 ShiftTemp:PressEdge:B4 *ENG [100 to 250 / 215 / 1deg/step]
1-121-124 ShiftTemp:FusingEdge:LT *ENG [100 to 250 / 225 / 1deg/step]
1-121-125 ShiftTemp:PressCenter:B5 *ENG [100 to 250 / 220 / 1deg/step]
1-121-126 ShiftTemp:PressCenter:A5 *ENG [100 to 250 / 210 / 1deg/step]
1-121-127 ShiftTemp:PressCenter:B6 *ENG [100 to 250 / 210 / 1deg/step]
1-121-128 ShiftTemp:PressCenter:A6 *ENG [100 to 250 / 210 / 1deg/step]
1-121-141 Pre Job Paper Feed Time:A3 *ENG [0 to 10000 / 10000 / 1sec/step]
1-121-142 Soaking Rotary Time:A3 *ENG [0 to 100 / 10 / 1sec/step]
Engine SP Tables-1
151