Ricoh MP C3004 - Page 1589

2-109-009 Density: Ye ENG [0 to 15 / 15 / 1/step]
2110 [LD Driver]
2-110-001 Error Bk
*ENG [0x0000 to 0xFFFF / 0x0000 / 1/
step]
2-110-002 Error Ma
*ENG [0x0000 to 0xFFFF / 0x0000 / 1/
step]
2-110-003 Error Cy
*ENG [0x0000 to 0xFFFF / 0x0000 / 1/
step]
2-110-004 Error Ye
*ENG [0x0000 to 0xFFFF / 0x0000 / 1/
step]
2-110-005 Writing Unit Adj. Transfer ENG [0 or 1 / 0 / 1/step]
2111 [Forced Line Position Adj.]
2-111-001 Mode a ENG [0 or 1 / 0 / 1/step]
2-111-002 Mode b ENG [0 or 1 / 0 / 1/step]
2-111-003 Mode c ENG [0 or 1 / 0 / 1/step]
2-111-004 Mode d ENG [0 or 1 / 0 / 1/step]
2112 [TM/ID Sensor Check]
2-112-001 Execute ENG [0 or 1 / 0 / 1/step]
2112 [TM/ID Sensor Test]
2-112-010 General:FCR *ENG [0 to 999 / 0 / 1/step]
2-112-020 Threshold Setting *ENG [0 to 3.5 / 1.9 / 0.01-V/step]
2117 [Skew Adjustment]
2-117-001 Pulse: M *ENG [-75 to 75 / 0 / 1pulse/step]
2-117-002 Pulse: C *ENG [-75 to 75 / 0 / 1pulse/step]
2-117-003 Pulse: Y *ENG [-99 to 99 / 0 / 1pulse/step]
Engine SP Tables-2
243