EasyManua.ls Logo

Ricoh MP C3004 - Page 1774

Ricoh MP C3004
2154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-321-042 Vsg TM(Center) *ENG [0 to 5.5 / 4 / 0.01V/step]
3-321-043 Vsg TM(Rear) *ENG [0 to 5.5 / 4 / 0.01V/step]
3322 [Adjusted Ifsg]
3-322-001 Ifsg RTP (Front) *ENG [0 to 50 / 10 / 0.001mA/step]
3-322-002 Ifsg RTP (Center) *ENG [0 to 50 / 10 / 0.001mA/step]
3-322-003 Ifsg RTP (Rear) *ENG [0 to 50 / 10 / 0.001mA/step]
3-322-011 Ifsg Min (Front) *ENG [0 to 50 / 27 / 0.001mA/step]
3-322-012 Ifsg Min (Center) *ENG [0 to 50 / 27 / 0.001mA/step]
3-322-013 Ifsg Min (Rear) *ENG [0 to 50 / 27 / 0.001mA/step]
3-322-021 Ifsg: TM(Front) *ENG [0 to 50 / 10 / 0.001mA/step]
3-322-022 Ifsg: TM(Center) *ENG [0 to 50 / 10 / 0.001mA/step]
3-322-023 Ifsg: TM(Rear) *ENG [0 to 50 / 10 / 0.001mA/step]
3323 [Vsg Adj OK?]
Code Result detail
0 Did not EXEC. (SP default)
1 Succeed -
2 ID sensor proofread error
Out of range from Vsg= Vsg_reg(target value)
±x.x[V/step]
3 Offset voltage error Voffset_reg>Max. or Voffset_dif>Max.
4 LED Ampere Max. error. Ifsg>Max.
5 ID sensor output error. Vsg< Vsg_reg(error)
9 Kill Kill by error of door open, power off.
3. Engine SP Mode Tables
428

Table of Contents

Related product manuals