Ricoh MP C3004 - Page 1968

5-191-001 Power Str Set *CTL [0 or 1 / 1 / 1]
0: OFF
1: ON
5193 [External Controller Info. Settings]
5-193-001 - CTL [0 to 10 / 0 / 1]
0: External Controller is not installed
1: EFI
2: Ratio
3: Egret
4: GJ
5:Creo
6: QX-100
7: Kurofune
8 to 10: Reserved
5195 [Limitless SW]
5-195-001 - *CTL [0 or 1 / 0 / 1]
0: Productivity Precede
1: Use paper up
5196 [Copier Vendor Mode]
5-196-001 90 deg. Rotation CTL [0 or 1 / 0 / 1]
5-196-002 Color and Tray Selection CTL [0 or 1 / 0 / 1]
5199 [Paper Exit After Staple End]
5-199-001 Staple(1:Without 2:After 0:Auto) CTL [0 to 2 / 0 / 1]
5-199-002 Saddle(1:Without 2:After 0:Auto) CTL [0 to 2 / 0 / 1]
5-199-003 Stapless(1:Without 2:After
0:Auto)
CTL [0 to 2 / 0 / 1]
4. Controller SP Mode Tables
622