5-816-068 CERT: Error *CTL [0 to 255 / 0 / 1]
Displays a number code that describes the reason for the request for update of the
certification.
0 Normal. There is no request for certification update in progress.
1 Request for certification update in progress. The current certification has expired.
2 An SSL error notification has been issued. Issued after the certification has expired.
3 Notification of shift from a common authentication to an individual certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
5-816-069 CERT: Up ID *CTL [- / - / -]
-
5-816-083 Firm Up Status *CTL [0 to 5 / 0 / 1]
0: Waiting for accepting firm update
1: Waiting for firm update start
schedule
2: Waiting for user confirmation
3: In preparation for the machine firm
update
4: processing the machine firm update
5: processing the closing operation of
the machine firm update
5-816-085 Firm Up User Check CTL [- / - / -]
5-816-086 Firmware Size CTL [- / - / -]
5-816-087 CERT:Macro Ver. CTL [8digits / - / 1digit/step]
5-816-088 CERT:PAC Ver. CTL [16digits / - / 1digit/step]
5-816-089 CERT:ID2Code CTL [17digits / - / 1digit/step]
5-816-090 CERT:Subject CTL [17digits / - / 1digit/step]
5-816-091 CERT:Serial No. CTL [16digits / - / 1digit/step]
Controller SP Tables-5
647
To Next Page
Loading...
