Ricoh MP C3004 - Page 2002

5-828-069 Job Spooling (Protocol) *CTL [0 or 1 / 0 / 1]
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: (Reserved)
5-828-087 Protocol usage * CTL [0 or 1 / 0x00000000 / 1bit]
Shows which protocols have been used with the network.
0: Off (Not used the network with the protocol.)
1: On (Used the network with the protocol once or more.)
bit0: IPsec, bit1: IPv6, bit2: IEEE 802. 1X, bit3:Wireless LAN,
bit4: Security mode level setting, bit5:Appletalk, bit6: DHCP,
bit7: DHCPv6, bit8: telnet, bit9: SSL, bit10: HTTPS,
bit11: BMLinkS printing, bit12: diprint printing, bit13: LPR printing,
bit14: ftp printing, bit15: rsh printing, bit16: SMB printing,
bit17: WSD-Printer, bit18: WSD-Scanner, bit19: Scan to SMB,
bit20: Scan to NCP, bit21: Reserve, bit22: Bluetooth,
bit23: IEEE 1284, bit24: USB printing, bit25: Dynamic DNS,
bit26: Netware printing, bit27: LLTD, bit28: IPP printing,
bit29: IPP printing (SSL), bit30: ssh, bit31: sftp
5-828-090 TELNET (0: OFF 1: ON) * CTL [0 or 1 / 1 / 1]
0: Disable
1: Enable
5-828-091 Web (0: OFF 1: ON) * CTL [0 or 1 / 1 / 1]
0: Disable
1: Enable
4. Controller SP Mode Tables
656