Ricoh MP C3004 - Page 2042

7-509-048 Exit Sensor: Off *CTL [0 to 65535 / 0 / 0]
7-509-049 Shift Motor *CTL [0 to 65535 / 0 / 0]
7-509-050
Junction Solenoid
Motor
*CTL [0 to 65535 / 0 / 0]
7-509-051
Exit Paper Pressure
Motor
*CTL [0 to 65535 / 0 / 0]
7-509-052 Stapler Motor *CTL [0 to 65535 / 0 / 0]
7-509-093 No Exit Response *CTL [0 to 65535 / 0 / 0]
7514 [Paper Jam Count by Location]
7-514-001
At Power On
*CTL Paper is not fed at power on.
[0000 to 9999 / - / 1/step]
7-514-003 Tray 1: On *CTL [0000 to 9999 / - / 1/step]
7-514-004 Tray 2: On *CTL [0000 to 9999 / - / 1/step]
7-514-005 Tray 3: On *CTL [0000 to 9999 / - / 1/step]
7-514-006 Tray 4: On *CTL [0000 to 9999 / - / 1/step]
7-514-007 LCT: On *CTL [0000 to 9999 / - / 1/step]
7-514-008 Bypass: On *CTL [0000 to 9999 / - / 1/step]
7-514-009 Duplex: On *CTL [0000 to 9999 / - / 1/step]
7-514-011 Transport Sensor 1: On *CTL [0000 to 9999 / - / 1/step]
7-514-012 Transport Sensor 2: On *CTL [0000 to 9999 / - / 1/step]
7-514-013 Vertical Trans. Sn 3: On *CTL [0000 to 9999 / - / 1/step]
7-514-014 Vertical Trans. Sn 4: On *CTL [0000 to 9999 / - / 1/step]
7-514-015 LCT Transport Sensor:
On
*CTL [0000 to 9999 / - / 1/step]
7-514-017 Registration Sensor: On *CTL [0000 to 9999 / - / 1/step]
7-514-018 Fusing Entrance Sensor:
On
*CTL [0000 to 9999 / - / 1/step]
4. Controller SP Mode Tables
696