8063 [F:FIN Jobs]
These SPs total finishing methods for fax jobs only. The finishing method is specified
by the application.
Note: Finishing features for fax jobs are not available at this time.
8064 [P:FIN Jobs]
These SPs total finishing methods for print jobs only. The finishing method is specified
by the application.
8065 [S:FIN Jobs]
These SPs total finishing methods for scan jobs only. The finishing method is specified
by the application.
Note: Finishing features for scan jobs are not available at this time.
8066 [L:FIN Jobs]
These SPs total finishing methods for jobs output from within the document server
mode screen at the operation panel. The finishing method is specified from the print
window within document server mode.
8067 [O:FIN Jobs]
These SPs total finishing methods for jobs executed by an external application, over
the network. The finishing method is specified by the application.
001 Sort *CTL [0 to 9999999 / 0 / 1/step]
Number of jobs started in Sort mode.
002 Stack *CTL [0 to 9999999 / 0 / 1/step]
Number of jobs started out of Sort mode.
003 Staple *CTL [0 to 9999999 / 0 / 1/step]
Number of jobs started in Staple mode.
004 Booklet *CTL [0 to 9999999 / 0 / 1/step]
Number of jobs started in Booklet mode. If the machine is in staple mode, the Staple
counter also increments.
Controller SP Tables-8
721
To Next Page
Loading...
