002 Back *CTL [0 to 9999999 / 0 / 1/step]
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the same as the
number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is the same as
the number of pages fed for duplex rear-side scanning.
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also,
the pages are not counted if the jam occurs before the first sheet is output.
8231 [Scan PGS/Mode]
These SPs count the number of pages scanned by each ADF mode to determine the work
load on the ADF.
001 Large Volume *CTL [0 to 9999999 / 0 / 1/step]
Selectable. Large copy jobs that cannot be loaded in the ADF at one time.
002 SADF *CTL [0 to 9999999 / 0 / 1/step]
Selectable. Feeding pages one by one through the ADF.
003 Mixed Size *CTL [0 to 9999999 / 0 / 1/step]
Selectable. Select "Mixed Sizes" on the operation panel.
004 Custom Size *CTL [0 to 9999999 / 0 / 1/step]
Selectable. Originals of non-standard size.
005 Platen *CTL [0 to 9999999 / 0 / 1/step]
Book mode. Raising the ADF and placing the original directly on the platen.
006 Mixed 1side/ 2side *CTL [0 to 9999999 / 0 / 1/step]
Simplex and Duplex mode.
• If the scan mode is changed during the job, for example, if the user switches from ADF to Platen
mode, the count is done for the last selected mode.
• The user cannot select mixed sizes or non-standard sizes with the fax application so if the original's
page sizes are mixed or non-standard, these are not counted.
4. Controller SP Mode Tables
730
To Next Page
Loading...
