004 200dpi to 399dpi *CTL [0 to 9999999 / 0 / 1/step]
005 < 199dpi *CTL [0 to 9999999 / 0 / 1/step]
• Copy resolution settings are fixed so they are not counted.
• The Fax application does not allow finely-adjusted resolution settings so no count is done for the
Fax application.
8321 [T:Sacn Poster]
8322 [C:Sacn Poster]
8326 [L:Sacn Poster]]
001 2 Sheet *CTL [0 to 9999999 / 0 / 1/step]
002 4 Sheet *CTL [0 to 9999999 / 0 / 1/step]
003 9 Sheet *CTL [0 to 9999999 / 0 / 1/step]
8381 [T:Total PrtPGS] *CTL These SPs count the number of pages printed
by the customer. The counter for the
application used for storing the pages
increments.
[0 to 99999999 / 0 / 1/step]
8382 [C:Total PrtPGS] *CTL
8383 [F:Total PrtPGS] *CTL
8384 [P:Total PrtPGS] *CTL
8385 [S:Total PrtPGS] *CTL
8386 [L:Total PrtPGS] *CTL
8387 [O:Total PrtPGS] *CTL
• When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is counted
as 2.
• When several documents are merged for a print job, the number of pages stored are counted for
the application that stored them.
• These counters are used primarily to calculate charges on use of the machine, so the following
pages are not counted as printed pages:
- Blank pages in a duplex printing job.
- Blank pages inserted as document covers, chapter title sheets, and slip sheets.
- Reports printed to confirm counts.
- All reports done in the service mode (service summaries, engine maintenance reports, etc.)
Controller SP Tables-8
735
To Next Page
Loading...
