• The B/W and Color counts are done after the document is stored on the HDD of the Scan Router
server.
• If the job is canceled before storage on the Scan Router server finishes, the counts are not done.
• The count is executed even if regardless of confirmation of the arrival at the Scan Router server.
8671 [T:Deliv PGS/PC]
These SPs count by color mode the total number of pages sent to a folder on a PC (Scan-
to-PC) with the Scan and LS applications.
8675 [S: Deliv PGS/PC]
These SPs count by color mode the total number of pages sent with Scan-to-PC with the
Scan application.
001 B/W *CTL [0 to 9999999 / 0 / 1/step]
002 Color *CTL [0 to 9999999 / 0 / 1/step]
8681 [T:PCFAX TXPGS] *CTL These SPs count the number of pages sent by
PC Fax. These SPs are provided for the Fax
application only, so the counts for SP8 681
and SP8 683 are the same.
[0 to 9999999 / 0 / 1/step]
8683 [F:PCFAX TXPGS] *CTL
• This counts pages sent from a PC using a PC fax application, from the PC through the copier to the
destination.
• When sending the same message to more than one place using broadcasting, the pages are only
counted once. (For example, a 10-page fax is sent to location A and location B. The counter goes
up by 10, not 20.)
8691 [T:TX PGS/LS] *CTL These SPs count the number of pages sent
from the document server. The counter for the
application that was used to store the pages
is incremented.
[0 to 9999999/ 0 / 1/step]
The L: counter counts the number of pages
stored from within the document server mode
screen at the operation panel. Pages stored
with the Store File button from within the
Copy mode screen go to the C: counter.
8692 [C:TX PGS/LS] *CTL
8693 [F:TX PGS/LS] *CTL
8694 [P:TX PGS/LS] *CTL
8695 [S:TX PGS/LS] *CTL
8696 [L:TX PGS/LS] *CTL
4. Controller SP Mode Tables
760
To Next Page
Loading...
