1-001-00
1
Bit Switch 1 0 1
bit
0
DFU -
-
bit
1
Responding with the hostname as the sysName Model
name
(PnP name)
Hostname
This BitSwitch can change the value of the sysName.
0 (default): Model name (PnP name) such as "MP C401SP"
1: Host name
bit
2
DFU
-
-
bit
3
No I/O Timeout Disabled Enabled
Enables/Disables MFP I/O Timeouts. If enabled, the MFP I/O Timeout setting
will have no affect. I/O Timeouts will never occur.
bit
4
SD Card Save Mode Disabled Enabled
If this bit switch is enabled, print jobs will be saved to the GW SD slot and not
output to paper.
bit
5
[PS and PDF] Paper size error margin ±5pt ±10pt
When a PS job is printed by using a custom paper size, the job might not be
printed because of a paper size mismatch caused by a calculation error. By
default, the error margin for matching to a paper size is ±5 points. By enabling
this BitSwitch, the error margin for matching to a paper size can be extended to
±10 points.
bit
6
Color balance switching 0:Disabled 1:Enabled
This BitSwitch can be used to restore the color balance to match that of previous
models. If this BitSwitch is set to "1" (Enabled), the color balance that is
equivalent to Fuji-Xerox printers will be used.
bit
7
[RPCS,PCL]: Printable area frame border Disabled Enabled
Prints all RPCS and PCL jobs with a border around the printable area.
1001 [Bit Switch]
Printer Service Menu
771
To Next Page
Loading...
