bit 5 Display UTF-8 text in the operation panel Enabled Disabled
Enabled (=0):
Text composed of UTF-8 characters can be displayed in the operation panel.
Disabled (=1):
UTF-8 characters cannot be displayed in the operation panel.
For example, job names are sometimes stored in the MIB using UTF-8 encoded
characters. When these are displayed on the operation panel, they will be
garbled unless this BitSw is enabled (=0).
bit 6 Disable super option Enabled Disabled
Switches super option disable on / off. It this is On, multiple jobs are grouped
at LPR port. PJL settings are enabled even jobs that are specified queue names
are sent.
bit 7 Enable/Disable Print from USB/SD's Preview
function
Enabled Disabled
Determines whether Print from USB/SD will have the Preview function.
Enabled (=0): Print from USB/SD will have the Preview function.
Disabled (=1): Print from USB/SD will not have the Preview function.
1001 [Bit Switch]
1-001-010 Bit Switch A 0 1
bit
0
DFU
- -
bit
1
DFU
- -
bit
2
DFU
- -
bit
3
DFU
- -
bit
4
DFU
- -
4. Controller SP Mode Tables
780
To Next Page
Loading...
