3. Reattach the SD card slot cover.( ×1)
4. Do one of the following ("A" or "B") to enable the IPDS function.
A. [Enable the IPDS function via telnet]
1. Connect the machine via telnet.
2. Execute the following commands:
msh> set ipds up
***If you want to stop the function.
msh> set ipds down
B. [Enable the IPDS option via Web Image Monitor]
1. Log in to Web Image Monitor.
2. Change the setting to enable IPDS.
5. Attach the decal.
6. Print out the "Configuration Page", and then check if this option is correctly recognized.
• User Tools > Machine Features > Printer Features > List/Test Page > Configuration Page
2. Installation
440
To Next Page
Loading...
