SC No. Type Error Name/Error Condition/Major Cause/Solution
This SC is issued only for the machine that has the Smart Operation Panel
installed.
• Communication between Smart Operation Panel and main machine
(this is called "Flair communication") is not sent to Smart Operation
Panel.
• SP setting (SP5-748-201) for Smart Operation Panel is not
activated.
The CATS module (controller) did not see the response to notification of
monitoring service module (operation panel).
• Turn the main power OFF/ON.
• Set SP5-748-201 (OpePanel Setting: Cheetah Panel Connect
Setting) to "1: Connect" if the value is "0: Not connect".
SC620-Service Call 620-689
969
To Next Page
Loading...
